Cut PEX Pipe and squarely. Remove any burs.
Slide correct sized stainless steel sleeve over the end of the PEX pipe. Look at the view hole to see if it is over the pipe.
Push the fitting into the pipe unitl it touches the fitting shoulder.
Hold the tool at 90 degree to the sleeve and close the jaws completely. Crimp only one time.
If the pipe can be seen from the view hole and a "W" shaped crimp has been fromed, it's a good connection.
Check for proper crimp with the Go/No-Go gauge.
This is What I Need, Contact to Customize.
EN 
TH 
ZH